In this article, we will provide a guide on what to consider before choosing the best glass door to showcase your refrigerator.



Displaying refrigerators is one of the most important necessities of the food business. Displaying products in the best way is the best way to attract customers. Display cabinets are specially designed to display food or any other product in a pleasant way. These display units are also called glass door display refrigerators. These wine beverage fridges are widely used in cafeterias, restaurants, bakeries and shops.



When choosing a supermarket display refrigerator, you need to consider some of the following.



Get a second-hand refrigerator or a new one?

Buying a second-hand refrigerator will definitely save some money, but there are a few things to consider before buying a second-hand refrigerator. It is important to check the compressor of the equipment, because all the heavy work needs to be done by the compressor. If the compressor is damaged, the compressor needs to be replaced, which will cost more than buying a new refrigerator. Therefore, it is best to buy new equipment, as new equipment comes with warranty and maintenance services, albeit much more expensive than using older equipment.Another advantage is that the new refrigerator is more energy efficient.



Choice of ideal capacity:

These glass door display refrigerators are sized in cubic meters, and capacity requirements vary based on the type of product you plan to display. Before choosing a refrigerator, you need to be very clear about how much food you need to store at one time, because too much inventory can affect the efficiency of your equipment.



If the capacity is larger than the device requires, it will eventually look as if you have run out of product; if the capacity is less than the required capacity, you will end up with excess inventory. Neither case will leave a good impression on the customer.



Know the exact size:

There are many display refrigerators in different designs on the market, before you start looking for a supermarket display refrigerator that fits your location. The first thing to do is to measure the size of the space available on the device, and the width and height of that place should be measured correctly. Second, the type of door needs to be considered, because if the display refrigerator is an upright display refrigerator and has a hinged door, it will require more space to open. If the device has a sliding door, you can save even more space. Both external and internal dimensions should be considered because two units with the same external dimensions may have different capacities depending on their internal dimensions.

First, high-quality glass door upright cooler are made of high-quality copper coils, processed into spacious and diverse shapes.

　　The surface finish of the stainless steel plate is good, and the overall thickness of the plate is uniform. Because it guarantees a long life with uniform thickness, the overall appearance of the glass door upright cooler looks flat and strong. At the same time, copper pipes have better refrigeration effects than aluminum pipes and composite pipes, and have better corrosion resistance. There are few cleanliness and pipe connections in the excellent copper coils, which effectively prevent leakage and blockage in the refrigeration system. The round tube is processed into a rectangle, and the contact between the evaporator tube and the refrigeration liner increases from point contact to surface contact, which expands the cold transfer area and improves the cooling speed of the high-quality glass door freezer compartment.

　Second, the thermal insulation effect of high-quality glass door upright cooler is very important.

　　 The thermal insulation of the glass door upright cooler is an important index to measure the quality of the glass door upright cooler. When manufacturing the glass door upright cooler, it is necessary to use the material temperature control and special fixtures and master the first-class foaming technology to ensure the excellent heat preservation performance of the glass door vertical cooler.

   Third, the overall structure of the glass door upright cooler is stronger.

　　 The sturdiness of a glass door upright cooler has a lot to do with the life of the glass door upright cooler. An integrated angle steel frame is used between the outer shell and the inner container of the high-quality glass door upright cooler, which is like the steel bars on the concrete prefabricated panel, which somewhat improves the robustness of the high-quality glass door upright cooler. After welding the door frame of the glass door upright cooler, one-time foaming is performed, which can avoid the shortcoming that the glass door upright cooler door is easy to fall off.

First, the Upright Freezer evaporator has more air or refrigerated oil, and the heat transfer effect is reduced. More refrigerant oil is attached to the heat transfer tube of Upright Freezer evaporator, and the heat transfer coefficient is greatly reduced. Similarly, if there is more air in the electric heating pipe, the heat transfer area of the refrigerated cabinet evaporator will be reduced, the heat transfer efficiency will be significantly reduced, and the temperature reduction rate will also slow down.

Second, the frost or dust of the Upright Freezer evaporator is too thick, and the heat transfer effect is reduced. Another main reason for the slow temperature drop of the Upright Freezer is the low heat transfer efficiency of the evaporator. This is mainly because the frost layer on the outside of the Upright Freezer evaporator is too thick or too dusty. Because the external temperature of the evaporator is mostly lower than 0 degrees Celsius, the humidity of the Upright Freezer is relatively high, and the moisture in the air is sandwiched with cream or frozen outside the evaporator, which affects the heat transfer effect of the Upright Freezer evaporator.

Take a look at the thermostat from Upright Freezer. The freezer temperature regulator is installed in the Upright Freezer, and the temperature does not reach the temperature required by the temperature regulator. If the compressor does not shut down day and night, the freezer will cause the extreme refrigerant temperature of the refrigerant. Most of this phenomenon occurs in air-cooled refrigerator compartment refrigerators. Because the evaporator defroster of the refrigerator compartment is broken, the ice is blocked. The cooling fan is broken, or there are too many things in the freezer, the outlet is blocked, and the reason for the poor cooling effect cannot be ruled out.

You can verify whether the power connection is correct, check whether the lights in the freezer are normal, or you can further test with an electric pen. If the power connection is normal, you can monitor whether the compressor is working properly. The compressor makes a slight motor vibration during normal operation. The high-pressure output buffer pipe in the compressor is damaged or the screw fixing this pipe is loose. The high-pressure pipe does not discharge air, and the low-pressure pipe does not suck air. Therefore, the compressor works but cannot be cooled.


The compressor is working normally, you can check whether the refrigerant is used up in the cooling system. After the freezer runs for about 3-5 minutes, the power supply can be cut off and you can hear the sound of water flow. If there is no sound. Indicates that the refrigerant in the refrigeration system is exhausted or leaking. The compressor may lose its working capacity.

Solution: If there is a system leak, usually find the leaking part of the system, weld, pressure test, and add the refrigerant to a certain amount within an appropriate time to make the evaporator frost or the freezer to reach the rated temperature.

1. Upright Freezer's cooling performance

The performance of refrigeration is mainly based on the comprehensive evaluation of the refrigeration effect and cooling speed of the freezer. As long as these two aspects can meet certain standards, it can be regarded as a freezer with better refrigeration performance, just like if we store it in a freezer. When there is a lot of food, you can observe the refrigeration effect of the freezer to see how long the food in the freezer can achieve the effect of low-temperature preservation. The vertical freezer has the advantage that it is helpful for us to store food, and it is better to choose the suitable one. The temperature range preserves our food. Today's refrigerators will use vertical microcomputer temperature control technology and electronic microcomputer-designed temperature controllers. The temperature controller can automatically adjust the overall temperature of the refrigerator to ensure the freshness and safety of the food stored in the refrigerator. .

2. Understand the energy saving of freezer

The power consumption of refrigerators is a problem that many businesses who need refrigerators will consider. They will give priority to some low-energy refrigerators. In fact, I tell everyone that it is not necessarily a low-energy refrigerator that we use is good. I also need to use it according to our own The actual demand. Although some refrigerators have relatively low energy consumption, their power is also relatively small. If we want to store more food when we use it, the power of the refrigerator will not meet the requirements and the cooling requirements , Affect our use, when we choose the freezer, we should not deliberately pursue the lowest power consumption of the freezer, so as not to affect our use.

3. The design of the freezer

At present, when people buy freezers, they actually see the overall appearance of the freezer at first glance to see if the appearance can meet our requirements. Especially commercial freezers are used in supermarkets and convenience stores with a relatively large flow of people. Locally, the aesthetic appearance is very important, but the practicality of the freezer must also be considered, and whether the raw materials used in the freezer can be durable and corrosion-resistant.