The raw materials used in deli display case are generally tempered glass. The use of display cabinet materials makes the product more resistant to corrosion, and it can be easily cleaned. The product is very convenient to use. In addition, the display cabinets are all glass on all sides, and the airtight design not only has a good display effect, is safe and beautiful, but the fully enclosed design makes the cabinet cooler and can save energy.



The food placed inside the cabinet also needs to leave a gap to facilitate the circulation of cold air. The place where the air vent of the cabinet should not be filled with food. In addition, the cabinet will be defrosted and defrosted in the refrigerating cabinet, and the thicker frost on the surface of the evaporator can be removed with ice shovel. Avoid shoveling scratches on the surface of the evaporator when defrosting. It is recommended that you do not use sharp tools to shovel the frost. After the defrosting is over, the refrigerator and freezer compartments in the cabinet can be scrubbed with dry rags, and the water drops in the cabinet can be wiped off to prevent the cabinet from working again and re-frosting and freezing.



Shopping malls need to pay attention to certain use skills when using deli display case. If it is the first use, you can plug in the power and let it work for a period of time before putting food in the display cabinet. If the noise is too loud during work, try to eliminate the fault. , If you can’t find the reason, you can find a professional maintenance person for on-site service. In addition, you need to pay attention to prevent the amount of cooked food, and there should be no too much food in the display cabinet, otherwise it will affect the air flow of the cabinet and affect the cooling effect.



The deli display case has many functions, the most important of which is the coexistence of preservation and display. When using the display cabinet, it is best to read the instructions in advance to reduce machine damage caused by operating errors.

The supermarket is currently the most popular retail place in the city. As a senior foodie, entering the supermarket is mainly to find food, and cooked food is also one of the foods that cannot be ignored. In order to preserve and display the cooked food, the supermarket will put the food in the deli display case. Here is an introduction to the functions and use skills of the display cabinet.



As the name suggests, the deli display case is a kind of cabinet that can display cooked food. The main function of the deli display case is to keep the food fresh and reduce the deterioration of the food due to the hot weather. As a tool, the deli cabinet is not only useful for displaying food, but also can attract customers to consume, drive the distance between customers and the shopping mall, increase customers' enthusiasm for buying cooked food, and bring economic benefits to businesses.



At present, the deli display cases on the market are divided into different types. Whether it is a normal temperature display cabinet, a refrigerated display cabinet or a heated display cabinet, the temperature of the cabinet can be reduced, thereby reducing the speed of bacteria movement in the cabinet, thereby Prolong the preservation time of food.

In this article, we will provide a guide on what to consider before choosing the best glass door to showcase your refrigerator.



Displaying refrigerators is one of the most important necessities of the food business. Displaying products in the best way is the best way to attract customers. Display cabinets are specially designed to display food or any other product in a pleasant way. These display units are also called glass door display refrigerators. These wine beverage fridges are widely used in cafeterias, restaurants, bakeries and shops.



When choosing a supermarket display refrigerator, you need to consider some of the following.



Get a second-hand refrigerator or a new one?

Buying a second-hand refrigerator will definitely save some money, but there are a few things to consider before buying a second-hand refrigerator. It is important to check the compressor of the equipment, because all the heavy work needs to be done by the compressor. If the compressor is damaged, the compressor needs to be replaced, which will cost more than buying a new refrigerator. Therefore, it is best to buy new equipment, as new equipment comes with warranty and maintenance services, albeit much more expensive than using older equipment.Another advantage is that the new refrigerator is more energy efficient.



Choice of ideal capacity:

These glass door display refrigerators are sized in cubic meters, and capacity requirements vary based on the type of product you plan to display. Before choosing a refrigerator, you need to be very clear about how much food you need to store at one time, because too much inventory can affect the efficiency of your equipment.



If the capacity is larger than the device requires, it will eventually look as if you have run out of product; if the capacity is less than the required capacity, you will end up with excess inventory. Neither case will leave a good impression on the customer.



Know the exact size:

There are many display refrigerators in different designs on the market, before you start looking for a supermarket display refrigerator that fits your location. The first thing to do is to measure the size of the space available on the device, and the width and height of that place should be measured correctly. Second, the type of door needs to be considered, because if the display refrigerator is an upright display refrigerator and has a hinged door, it will require more space to open. If the device has a sliding door, you can save even more space. Both external and internal dimensions should be considered because two units with the same external dimensions may have different capacities depending on their internal dimensions.

The refrigerator with mechanical temperature regulation generally has a temperature regulation of 0-7 gear. Correct temperature regulation can save electricity. In summer, it can save electricity by adjusting to 2-3 gear. In winter, it can be adjusted to 6-7 gear. The following is a detailed introduction:
1. The temperature range of the refrigerator is 0-7, which can save electricity by adjusting the temperature correctly. In summer, it can save electricity by adjusting to 2-3, and in winter, it can be adjusted to 6-7, mainly because the external temperature will affect the performance of the refrigerator;
2. If the temperature is about - 6 degrees below zero, it is regarded as a star, and the food can be stored for about a week; If the temperature is about - 12 degrees below zero, it will be regarded as two-star, and the food can be preserved for about a month; If the temperature is about - 15 degrees below zero, it is regarded as three-star, and the food can be preserved for about three months; If the temperature is around minus 18 degrees, the food can be kept for three to six months. Of course, only dry or refrigerated food can be kept for a long time. It is recommended that fresh vegetables and meat be eaten as soon as possible

What's the best temperature in the refrigerator | Slim Drinks Fridge

Electric glass defrosting function:
The electric glass defrosting function is designed to remove the frost layer formed on the glass surface due to low temperature, ensure the clear visibility of the glass, and provide users with good observation conditions. This function is essential for commercial refrigerators that need to clearly observe the internal items.
Working principle:
The defrosting of electric glass is based on the principle of resistance heating. In the interlayer of the glass, fine resistance wires are embedded or coated with conductive coatings. When current passes through these resistance elements, electrical energy is converted into thermal energy, and the glass heats up.
The frost layer melts into water after being heated, and then evaporates or is discharged along the drainage system of the refrigerator. Since the heat is evenly distributed inside the glass, the entire glass surface can be defrosted synchronously without the situation of local residual frost.
For example, in the resistance wire type electric heating glass, the resistance wire is distributed in a specific arrangement. When the current passes, the resistance wire heats up and the heat is quickly transferred to the glass surface.

Application introduction in commercial refrigerators:
Commercial refrigerators are usually used to store and display large quantities of refrigerated or frozen goods. In low temperature environments, the glass door of the freezer is prone to frost, which affects customers' observation and selection of goods.
Commercial freezers equipped with electric glass defrosting function can effectively solve this problem. Merchants do not need to frequently defrost manually, saving time and labor costs.
Customers can also clearly see the goods in the freezer, improving the shopping experience. Moreover, the continuous clear view helps merchants to better display goods and promote sales.
For example, in the frozen food area of ​​the supermarket, the freezer with electric glass defrosting function allows customers to see the packaging and labels of various frozen foods at a glance, which is convenient for purchase.
In the hotel's kitchen freezer, the chef can quickly and accurately find the required ingredients without having to wipe the frost layer laboriously.
In addition, the electric glass defrosting function also improves the energy efficiency of the freezer. Due to the reduction of the frost layer, the refrigeration system of the freezer does not need to consume more energy to overcome the insulation effect of the frost layer, thereby reducing operating costs.
In short, the application of electric glass defrosting function in commercial freezers not only improves the convenience and display effect of the freezer, but also brings the advantages of energy saving and reduced operating costs.