The raw materials used in deli display case are generally tempered glass. The use of display cabinet materials makes the product more resistant to corrosion, and it can be easily cleaned. The product is very convenient to use. In addition, the display cabinets are all glass on all sides, and the airtight design not only has a good display effect, is safe and beautiful, but the fully enclosed design makes the cabinet cooler and can save energy.
![Suggestions on The Use of Deli Display Case 1]()
The food placed inside the cabinet also needs to leave a gap to facilitate the circulation of cold air. The place where the air vent of the cabinet should not be filled with food. In addition, the cabinet will be defrosted and defrosted in the refrigerating cabinet, and the thicker frost on the surface of the evaporator can be removed with ice shovel. Avoid shoveling scratches on the surface of the evaporator when defrosting. It is recommended that you do not use sharp tools to shovel the frost. After the defrosting is over, the refrigerator and freezer compartments in the cabinet can be scrubbed with dry rags, and the water drops in the cabinet can be wiped off to prevent the cabinet from working again and re-frosting and freezing.
Shopping malls need to pay attention to certain use skills when using deli display case. If it is the first use, you can plug in the power and let it work for a period of time before putting food in the display cabinet. If the noise is too loud during work, try to eliminate the fault. , If you can’t find the reason, you can find a professional maintenance person for on-site service. In addition, you need to pay attention to prevent the amount of cooked food, and there should be no too much food in the display cabinet, otherwise it will affect the air flow of the cabinet and affect the cooling effect.
The deli display case has many functions, the most important of which is the coexistence of preservation and display. When using the display cabinet, it is best to read the instructions in advance to reduce machine damage caused by operating errors.
